Titanium carbide TiC CAS NO.12070-08-5

Grade

CHEMICAL COMPOSITION(max,%)

Total carbon

Free carbon

Impurities(max,%)

Nb

Fe

Si

O

N

Na

K

Ca

LF-TiC

≥19.1

≤0.30

0.01

0.05

0.02

0.50

0.20

0.01

0.005

0.01

Particle size:0.5-500micron, can be as requested.

TiC introduction

Titanium carbide, Chemical formula TiC, Molecular weight 59.91,Carbon content 20.05%,Density 4.93g/cm3, 

Melting point:3160ºC,Boiling point 4300ºC.

TiC are very hard gray crystals that are insoluble in water but soluble in nitric acid and aqua regia. It melts at

about 3140°C. it is used in cermets, arc-melting electrodes, and tungsten-carbide tools. 

An extremely hard and light refractory material with high thermal shock and abrasion resistance. It is used

for powder metallurgical (P/M) parts including cutting tool tips, dies and wear parts and resistant coatings.

It is also used as an additive to plastic & rubber parts to reduce wear and as an alternate to metal parts.

TiC Application:

Wear resistant applications, thin film ultra-capacitors, cermet components, bearings, nozzles, cutting tools, etc. 

Titanium carbide is an ideal abrasive material to replace alumina, silicon carbide, boron carbide, 

chromium oxide and other conventional material.Titanium carbide grinding capacity can compare with 

synthetic diamond, which greatly reduces the cost, currently it is widely used in the United States, Japan, 

Russia and other countries. abrasive material, grinding wheel and the grinding pastes made by titanium

 carbide can greatly improve efficiency, improve the grinding accuracy and surface finish.

1) Nano TiC is used in manufacturing wear-resistant materials like cutting tools,mold and metal melting 

crucible etc. 
2) Powder metallurgy application:Nano TiC can be used in powder metallurgy industry to produce ceramics,

 hard alloy spare parts e.x. drawing die,hard alloy mold
3) Nano titanium carbide ceramic is a good optical material; 
4) TiC nanopowder coating can improve the alloy, abrasive steel bearings, nozzles, cutting tools wear

 resistance;
5) Titanium carbide nanoparticles can be used in abrasive and mold industry to replace Aluminium oxide,

silicon carbide,boride silicon, chromic oxide. Its grainding capacity is as good as artificial diamond.

main products of LFJS

1.Powdered materials including Chromium Carbide Cr3C2 , Hafnium Carbide HfC,    Molybdenum Carbide Mo2C, Niobium Carbide NbC, Tantalum Carbide Tac, Titanium Carbide TiC, Vanadium Carbide VC, Zirconium Carbide ZrC, Titanium Carbide Nitrides Ti (C,N);
(suitable for plasma coating, thermal spray coating, cold spray,additive in cutting tools,CVD,PCB,3D printing,abrasive materials,MIM,powder metallurgy,etc)

2.compound carbide powder: (Ta,Nb)C,(W,Ti)C , (W,Ta)C, (Ti,Ta)C ，(W,Ti,Ta)C, (W,Ti,Ta.Nb)C,(W,Ti,Ta,Cr)C.

3.  Ti (C,N) based cermet rods/ inserts/blanks; (suitable for drilling and cutting tools, ,CNC tools, printed circuit board, drilling milling turning threading turning tools etc.Sinter-HIP process.)

4.  WC-CO tile cutting wheel.        

 5.TiC rods for max increasing wear life of high manganese wear parts;

contact us:

skype:shunjiangu;
email:vera at langfengmetallic.com;
mobile:86-15974242234
wechat:veragmail;